Hot searches：
Components Processing
is the affordable entry-level device to handle smaller demands. PCBs are fed between the circular blades manually to be separated.
to separate large numbers of PCBs without tiring. The lower circular blade is motor-driven. The PCB is fed, seized by the circular blade, transported and separated. The device especially fits with highly dense assembly or slim margin strips. Three speeds can be selected.
The distance between the holder 1 and the guide 2 is set so the PCB can be fed only in the milled groove.
Specification
| Technical data | MAESTRO 2 | MAESTRO 2M |
|---|---|---|
| Separation method | Component side: Circular blade Solder side: Circular blade | |
| Operation | manual | motor-driven |
| Separation speed | - | 100, 200, 300 mm/s |
| Separation length | 15 - 300 mm | |
| Material | FR4 | |
| Component height | Solder/component side up to 34 mm | |
| Power supply | - | 230/115 VAC, 50/60 Hz |
| Temperature / humidity Operation Stock Transport | + 10 - 35°C / 10 - 85 % not condensing 0 - 60°C / 20 - 80 % not condensing – 25 - 60°C / 20 - 80 % not condensing | |
| Width x Height x Depth | 195 x 330 x 620 mm | |
| Weight | 16 kg | 19 kg |
| Approvals | CE, FCC Class A | |
Long Press to Scan QR Code
Scan QR Code
